Tuesday, 21 April 2015

Alternator problems

Can alternator cause problems? Is it a battery problem or alternator? What are the symptoms of a new alternator? While an alternator with no charge often suggests a severe issue, an alternator with low charge is a little more positive.


Again, we’ve listed a few of the general faults that could be causing your alternator to fail to charge correctly. If fixing the below faults below do not work, please note you may have damaged a component within the alternator and may need to replace the unit.

One of the most common symptoms of a problem with the alternator is an illuminated Battery Light. Alternator problems are considered one of the more serious car problems. Main reason is that, once they appear, the car can be left without electric power rendering it practically useless.


If the problem is a bad alternator, your car will slowly lose power. Your lights may also be very dim. Understanding the warning signs of car alternator problems will help to avoid expensive repairs and inconvenient breakdowns. Replacing an alternator with a new OEM part is expensive, but there are alternatives.


Symptoms of alternator problems.

Normally this warning light should. If the car stops, then you most likely have a problem with the alternator. Another simple test is to check your interior lights. An alternator charges your battery when the car is running.


If the interior and dashboard lights come on brightly but slowly start to fade, then it indicates a problem whit the alternator. It demonstrates that the alternator cannot keep a charge when the car is.


If it remains on this is a tell-tale sign of an alternator problem. If you are experiencing problems with the electrical system, the alternator itself might be fine because the problem could be with one of the belts connected to the alternator. By doing a visual inspection of the engine compartment, you can determine if a belt is too loose or too tight.


If a belt is cracked or worn, you should be able to spot that as well. The Indicator Light On. Troubleshooting alternator problems.


One method to test the alternator is to perform a charging system test. This is a common test performed at dealerships and auto repair shops. Testing the alternator and charging system is a very easy DIY if you have a Charging System Analyzer.


A charging system test will help you determine if your alternator. When it starts to fail, it can create a domino effect of electrical problems that can ultimately cause a breakdown.

To differentiate an alternator problem from the battery, you will need to use a voltmeter to check for voltage. First, turn off the engine and check the battery voltage.


Repairing your alternator is easy and cheap! If you detect that your windows demand a lot of time to go down or up, it may be an alternator trouble. Look for any suspicious sme.


Touch the big post on the alternator (the positive terminal post on the alternator ) with the red lead of the multimeter, and touch the other lead on the alternator case. With the multimeter set to measure resistance, it should measure more than 5ohms if the alternator diode is any good.


Make sure when you do it that the battery is disconnected to prevent any electrical shorts or shocks.

No comments:

Post a Comment

Note: only a member of this blog may post a comment.